LA-600
High-speed, High-precision Spindle LA-600 for Micro-Machining
The high-speed, high-precision spindle LA-600 is a high-speed spindle unit fine-tuned to meet micro-machining needs. Rotating at the high speed of 60,000 revolutions per minute, the spindle demonstrates outstanding cutting performance and finishing accuracy in end-mill or drill machining. |
 |
| Maximum revolution speed : 60,000min-1 (rpm) | Spindle accuracy : 1μm or better |
| A combination of air cooling and ceramic bearing realizes the speeds of 10,000 to 60,000min-1 (rpm) . | The spindle accuracy is better than 1μm. Even the dynamic run-out accuracy is within the control. |
Compact size and high-rigidity stainless steel body
| The spindle body is as short as 149mm. The motor and spindle exteriors are all stainless steel (SUS420J2). The spindle clamp, which is hardened and grinder-finished, are of high-rigidity specifications. |
 |
Photograph of processing by BISSIAH MD20
 |
High power of max.370W output and flat torque
| A flat torque characteristic is displayed over the whole speed range of 10,000 to 60,000 min-1 (rpm). The brushless motor is a highly reliable and durable type. The maximum output is as high as 370W. |
| Output and Torque Curves |
 |
Principal Uses
| * | Use as tooling for end-mill machining or grinding with an end-mill or grinding wheel attached to the spindle end on a comb-type lathe. |
| * | Use for small-bore hole finishing (bore polishing) in a lathe operation. |
| * | Use for deburring, drilling (by a drill) or slitting by a metal saw with this spindle attached to a dedicated machine. |
| * | Use for deburring or polishing with this spindle attached to the end of a robot arm. |